Access Guide
Location of Room(s) (DT004 - Wood Processing)
- DT004 - Wood Processing is located on the ground floor of the Design Centre, to the rear left of the building.
- There is step free access from Design Centre main entrance to DT004 - Wood Processing.
- To view the AccessAble Access Guide for Design Centre - DT please click here (new tab)
Lab(s)
- Signage for the room(s) is available in upper and lower case lettering that is clearly visible on or near the door.
- The corridor outside the room(s) is not sufficiently wide enough (150cm+) to allow wheelchair users to pass.
- There is step free access into the room(s) from the corridor.
- The door opening width(s) is/are 75cm+ for the room(s).
- The door(s) for the room(s) is/are not push pad activated.
- There is not a hearing assistance system for the room(s).
- There is a visual fire alarm beacon in the room(s).
- There is fixed furniture within the room(s).
- A height adjustable table/bench is not available.
- There are no chairs with armrests on both sides within the room(s).
- The room does have an unobstructed minimum turning space of 150cm x 150cm.
- Floor coverings in the room(s) are even with no trip hazards.
- There are fixed workbenches in the room. The clear height underneath the lowest is 86cm. The clear height underneath the highest is 88cm.